Dept. 10 AMPED 3
Dept. 10 AMPED 3
Dept. 10 AMPED 3
Dept. 10 AMPED 3
Dept. 10 AMPED 3
Dept. 10 AMPED 3

Dept. 10 AMPED 3

$619.99
SKU: AMPED3

AMPED 3 is a 100 Watt pedal multi-channel amplifier with user programmable presets. It features one of the highest gain circuits that Blackstar has ever developed and with the ability to recall your favourite tones via presets. AMPED 3 is capable of delivering the tone and feel of traditional valve amps.

AMPED 3 is a professional 100-Watt multi-channel guitar amp in a compact pedal. Designed to be the ultimate portable, all-in-one 100W amplifier, AMPED 3 features no compromises in tone, with 6 amp voices across three channels and 3 power amp responses.

  • Power reduction down to 1W and USB-C connectivity means it’s suited for the studio or the stage.
  • 100-Watt floorboard amp with three channels 6 total amp voices and 3 power amp responses to craft your own tone 
  • Built-in clean boost with pre/post routing switch
  • Cab Rig with three presets, output over USB-C, XLR DI, and 1⁄4” headphones jack
  • Speaker outputs to power 8 or 16 ohm cabinets
  • 9V DC outputs to power effects pedals
  • MIDI control over all parameters
  • Footswitchable reverb with dark/light voicing

Authentic Valve Amp Feel

The unique power amplifier design uses current feedback which mimics a valve amplifiers interaction with a speaker cabinet. This very high headroom design delivers the thump and presence of a valve amp with 100W power, into any speaker cabinet at 8 or 16 Ohms.

Universal Voltage

Dept 10. AMPED 3 is universal voltage so can be used anywhere in the world from 100V to 240V ~ 50/60Hz. Just stick it in your gigbag and hop on that plane.

The Pedalboard Partner

Effects loop, 2x 9V DC outputs and MIDI control for easy integration into your pedalboard or rig.

Performance Ready Multi Channel Amp Pedal

The AMPED 3 is a complete, all in one, gig-ready solution for guitarists looking to transport their tone from studio to stage with ease.

Power Reduction

Power Reduction switch allows you to select 100 Watts, 20 Watts or 1 Watt to easily get the perfect balance of power and response for any situation from studio to stage.

Switchable Power Valve Responses

The Response switch delivers three distinctly different authentic power valve responses - EL84, EL34, 6L6. Each setting delivers the response, dynamics, sag and break-up characteristics of the selected valve power amp.

Pro Connectivity

Pro connectivity and integration into your setup using low latency USB audio as an interface for recording, and XLR D.I. for live use.

Boost

The built-in Boost can be set to either Pre or Post, allowing you to drive the front end of the amplifier harder for a tighter, more saturated, tone. Alternatively, set it to post to get a level increase for that extra push when needed for leads and solos.

CabRig™

Includes our next-generation IR based speaker simulator that reproduces the sound and feel of a mic’d up guitar cab in incredible detail. Deep-dive using the accompanying free Architect software and capture the incredible tones via USB / XLR.

Reverb

The built-in Reverb has 2 modes which are switchable directly from the unit, Dark and Light. The Reverb's tone can be further edited with Architect software.

ISF

Featuring Blackstar's patented ISF (Infinite Shape Feature). This control will take your sound from a more US style tone stack, through to the UK and anywhere in between. Use this to fine tune your sound and set your own tonal signature.

DETAILED PRODUCT INFO

Type: Solid State

Number of Channels: 3

Total Power: 100W

Reverb: Yes

Effects: Boost

EQ: 3-band EQ

Amp Modeling: Yes

Number of Models: 3 x Valve Response, ISF Control, 3 x Cab Rig Presets

Inputs: 1 x 1/4"

Outputs: 1 x 1/4" (out), 1 x XLR (cab sim out), 2 x 1/4" (8 ohm, 16 ohm)

Headphones: 1 x 1/4" TRS (line out/headphone)

Effects Loop: 2 x 1/4" TS (+4dB, -10dB)

MIDI I/O: 2 x 1/8" (in, thru)

USB: 1 x Type-C (4-channel recording)

Computer Connectivity: USB

Software: Architect, CabRig

Features: USB Audio Interface

Construction Material: Aluminum Housing

Power Source: Standard IEC AC cable, 2 x 9V 500mA Power Outputs

Dimensions (in): 3.14" (height) x 11.22" (width) x 5.9" (depth)

Weight (lbs): 3.88

Manufacturer Part Number: AMPED3

(in): 3.14" (height) x 11.22" (width) x 5.9" (depth)

(lbs): 3.88

Standard IEC AC cable, 2 x 9V 500mA Power Outputs

Contact Us for product support. We're here to help.

Free shipping

Free shipping in the
continental US